DANTE-W2X2IO DANTE DIGITAL INTERFACE BOX

2025-10-23 16:20:38

Click：

“ This product supports two sets of balanced l/0 analog sianals to be connected to the Dante system through a local area network. The input interface uses a 2-in-1XLR socket and provides phantom power switch and input signal gain adjustment functions. The output interface is a standard three pin XLR socket, which outputs balanced analog signals.There are ”

BRIEF INTRODUCTION

This product supports two sets of balanced l/0 analog sianals to be connected to the Dante system through a local area network. The input interface uses a 2-in-1XLR socket and provides phantom power switch and input signal gain adjustment functions. The output interface is a standard three pin XLR socket, which outputs balanced analog signals.There are also four output versions for you to choose from. Please use Category 5 or above shielded twisted pair cables to connect the PoE switch to the back network interface

BASIC FUNCTION DESCRIPTION

Dante2X2 wall panel, used for signal conversion between analog audio signals and Dante digitalaudio.
This device supports 2-channel analog input and 2-channel analog output
This device supports 2-channel Dante input and 2-channel Dante output.
This device supports converting analog input to Dante digital audio; Support Dante digital audio conversion to analog audio output.
Each channel simulates input with phantom power switch and manual gain adjustment knob.
POE power supply,compatible with 802.3af and 802.3at standard POE switches
Front panel independent power indicator light.

Parameters

Simulate maximum gain	20dB
Frequency response	±0.2dB(20~20kHz)
Maximum voltage level	+8dBu, balanced
THD+N	<0.002% @ 0dBu
Bottom noise	-97dBu
Input impedance	20 kΩ
Output impedance	100Ω
Channel isolation degree	100dB @ 1kHz
Power supply	PoE